Most homeowners start pricing a deck by its size. In Colorado Springs, though, the decking line, the height off the ground, and the details you add can move the number just as much as the square footage.
In this blog, we'll share what a custom composite deck costs in Colorado Springs per square foot, what's included in that price, which choices move your budget most, and how to plan a deck around how you'll actually use it.
A custom composite deck from Rocky Mountain Custom Decks typically costs $75 to $100+ per square foot, with a $20,000 total project minimum. That price covers design, permits, demolition and haul-off, labor, and materials.
We'd rather give you real numbers up front than make you wait for a proposal to find out if a deck fits your plans. Here's how our pricing breaks down.
Every tier is built with composite decking, so the tiers differ in materials, layout, and level of detail.
Multiplying your deck's square footage by its tier gives you a solid early planning range.
*Smaller decks tend to land toward the higher end of each range, since design, permitting, and setup don't shrink along with the footprint. Your final price is confirmed at your on-site consultation.
The biggest cost drivers for a custom deck are its size, height, decking line, railing, framing, and site conditions. Two decks with the same footprint can end up at very different prices depending on these choices.
Size and shape.
More square footage means more material and labor. Angles, curves, and multiple levels add framing, cuts, and time.
Height off the ground.
A low deck off a walkout basement is a very different build than a second-story deck, which needs taller posts, heavier engineering, landings, and multi-run stairs.
Decking line.
Material choice is one of the biggest swings in your final price. Trex Enhance and Transcend Lineage are both composite, but they differ in color depth, finish, and how well they hold up under our high-altitude sun, and that difference carries straight through to cost per square foot.
Railing.
Railing is one of the most visible parts of a deck, and it's often one of the biggest price swings. Options run from composite and aluminum to Fortress steel, cocktail top rails, and glass.
Framing and drainage.
Fortress Evolution steel framing costs more than pressure-treated lumber, and so does a Trex RainEscape system that keeps the space under an elevated deck dry enough to use.
Site conditions.
Slopes, backyard access, an existing deck that needs to come out, and the way the deck ties into your home all shape the scope.
Every deck we build is engineered and permitted for Colorado conditions, including snow loads and freeze-thaw cycles. Footings and framing are never where we look to save money.
Custom features turn a deck from a place to be into a place you'll really want to spend your evenings. Here are some of the details homeowners love most:
You don't need every upgrade to create a space you'll love. Pick the two or three details that match how you'll use the deck most, and let those lead.
A realistic deck budget starts with how you plan to use the space, then works backward to the size, tier, and features that support it. Before your first conversation with a deck builder, think through these questions:
If a cover or pergola is on your wish list, it makes sense to build it with the deck. It costs less that way, since the permits and setup are shared.
You don't need every answer figured out ahead of time. A general budget and a short list of priorities give the design conversation a strong starting point.
Rocky Mountain Custom Decks is a veteran-owned Colorado Springs deck builder and Trex Platinum Pro that has been designing and building custom decks since 2006. We handle design, permits, concrete, and electrical under one contract, so you're not juggling separate trades.
Here's what working with us looks like:
Site Visit and Conversation:
We meet you at your home, look at the space firsthand, and talk through your ideas, priorities, and budget.
Custom Design and Transparent Pricing:
Your deck is designed around your home, followed by a detailed proposal so you know exactly what's included.
Permitting and Scheduling:
We take care of permits and inspections and set a schedule you can plan around.
Build and Clean-Up:
Our crew builds your deck while protecting your property and keeping the jobsite clean.
Walkthrough and Warranty:
We walk the finished deck with you, and our workmanship is backed by a five-year written warranty.
A custom composite deck with Rocky Mountain Custom Decks typically costs $75 to $100+ per square foot, with a $20,000 total project minimum. Your final number depends on size, height, materials, railing, and the features you choose.
A Trex deck typically runs $75 to $85 per square foot with Trex Enhance, $85 to $100 with Trex Select or Transcend, and $100+ with Transcend Lineage or Signature. Those prices include design, permits, labor, and materials, not just the boards.
Yes. Every deck, patio cover, and pergola project has a $20,000 total minimum. Smaller projects tend to land toward the higher end of each per-square-foot range.
Patio covers typically run $70 to $95+ per square foot, and pergolas typically run $100 to $140+ per square foot. Building either one together with a new deck usually costs less, since the permits and setup are shared.
We include these features as part of a larger deck, patio cover, or pergola project rather than as standalone jobs. Designing everything together keeps the space cohesive and makes the most of your budget.
Our pricing includes design, permits, demolition and haul-off, labor, and materials. Your final price is confirmed at your on-site consultation, once we've seen your property and talked through your plans.
Per-square-foot pricing gets you in the ballpark, but a site visit shows what your specific backyard calls for. We'll walk the space with you, talk through how you want to use it, and give you a straight answer on what it'll take to build.
Call (719) 322-7905 or contact Rocky Mountain Custom Decks to schedule your site visit.